Paint2Fix How It Works

Touch Up Paint Application

Before starting the application, make sure that the application area is clean and dry, and do not forget to wear the gloves included in the package for each application. Read this entire instruction for best results. 

Shake the paint bottle for about 20 seconds. Using a micro touch up brush, apply a small amount of touch up paint to fill the inside of the scratch or stone chip. The consistency of touch up paint is dense, you can cover many scratches with a small amount of paint.

In order to prevent the excess paint in the micro brush from flowing, you can rub the brush to the edge of the paint bottle and allow the excess paint on the brush to flow into the bottle. Getting rid of excess paint on the micro touch up brush makes it easier to apply touch up paint.

Touch up paint will not work on the rusty area if there is rust in or around the scratches and stone chips. Before touching up, you should remove the rust from the rusty area, if the rusty area is large, you should take your car to a body shop. If you are using Paint2Fix touch-up paint on the rusted area, please note that the paint may come off the rusty area after a while due to moisture in the rusted area.

If the bumper and plastic areas of your car are the same as the body color of your car, you can also use the touch up paint on the bumper and plastic areas.

If there is paint that extends beyond the touched-up scratches or stone chips after the touch up application, use the blending solution and clean the overflowing paint. You don’t need to use blending solution for a well done touch up application. Wait 5 minutes for the touch-up paint to dry before removing any overflowing paint with the blending solution.

After 20 minutes, apply a small amount of wax on the microfiber cloth, then apply it in a circular motion without too much pressure to and around the touched-up area and finish the touch up application. If ceramic coating and similar paint protection products have been applied to the body of your car, do not apply the wax around the touched-up area or try on a small area before applying.  (Wax application is not mandatory)